RAM CO2 Monitor and Controller

The CO2 controller has 2 operating modes, Plant mode OR Human mode:

Plant mode: plug a 220V solenoid of a CO2 regulator (not included) into the controller’s power outlet – the controller will turn ON the CO2 regulator when the CO2 levels in your grow room drop below the set-point. The integrated day/night sensor will be active in this mode, ensuring that the controller will NOT emit CO2 during your plants’ “night time” – when your plants don’t make use of it. A 1-week CO2 data log allows you to spot trends over a week period, leading to greater insight and a higher amount of control over your grow.

Human mode: plug a 220V extraction fan (not included) into the controller’s power outlet – the controller will turn ON the fan when the CO2 levels in the area where the sensor is installed become higher than the set-point. The integrated day/night sensor will be inactive in this mode, ensuring that the controller will turn on the extraction fan whenever CO2 levels become too high in the area.

RAM CO2 Monitor and Controller – Key Features:

A choice of 2 modes of monitoring and controlling (Human / Plant)
Large LCD display screen
1 week visual log of CO2 levels
4.5 M cable to CO₂ sensor
Wall mountable

Uses:

Monitor CO₂ levels live with the LCD display of the CO₂ PPM
Increase CO₂ levels (in plant mode) by controlling a CO₂ source.
Decrease CO₂ levels (in human mode) by activating your extraction.
Keep CO₂ levels within your pre-set range.

Technical Specifications:

Input: 100 – 240V AC / 50 – 60 Hz
Max. Load: 5A at 240V / 10A at 120V
Target CO2 setting: Between 400 and 3000 PPM
Tolerance Setting(Acceptable variance from target): Between 50 and 990 PPM
Measuring Range: 0 – 5000 PPM
Resolution: 1 PPM (0 – 1000), 5 PPM (1000 – 2000), 10 PPM (>2000)
Accuracy:
CO2 below 3000 PPM: +- 50 PPM or +- 5% of reading, whichever is greater
CO2 above 3000 PPM: +- 7% of reading
Response Time: CO2: < 2 min for 63% step change, < 4.6 min for 90% step change
Piggyback socket max load: 5 Amp @ 220V AC

Please note: This controller is equipped with U.K plugs (both male and female). South African plug adapters are not included with this unit, but will be needed to properly operate this controller.
This adapter will work on the one side: RSA Plug to Female Universal Socket Adaptor US / UK
You will need a UK plug male to SA female also for the other side.